Electricians

Downlight Spacing Guide: How Many Downlights Does a Room Need?

Work out how many downlights a room needs and how far apart to space them: the lumen method, a simple spacing rule, a worked example and common mistakes.

4 min read · 21 November 2026 · RoomPlot Team

Too few downlights and a room feels gloomy. Too many and the ceiling looks like a runway. There is a simple way to get it right: work out how much light the room needs, divide by what each fitting gives, then space them evenly. A floor plan makes the last step easy.

1.4 m0.7 m1.5 m Living room Downlight spacing A 2 x 3 grid in a 4.2 x 3.0 m room C1 Lighting All six downlights on one dimmer Connection (switch to light) SYMBOLS Recessed downlight Dimmer switch
Six downlights in a 4.2 by 3.0 m living room: 1.4 m apart along the room and 0.7 m in from the end walls.

Key takeaways

  • Work out the light needed: room area multiplied by a target in lux gives the total lumens.
  • Divide by the lumens of one downlight to get the number of fittings.
  • Space them evenly, with half the spacing between the last fitting and the wall.
  • Choose fire-rated and moisture-rated fittings where the ceiling and room require them.

Step 1 - How much light?

Multiply the floor area by a target light level. Typical targets for homes:

RoomTypical target
Hallways and landingsabout 100 lux
Living rooms and bedroomsabout 150 lux
Bathroomsabout 200 lux
Kitchens and home officesabout 300 lux

One lux is one lumen per square metre. These are common design targets, not legal requirements, and task lighting such as under-cabinet strips adds to them.

Step 2 - How many fittings?

Divide the total lumens by the output of the downlight you plan to use, which is printed on the box. Our example living room is 4.2 m by 3.0 m, so 12.6 m². At 150 lux that is 1,890 lumens. With downlights of about 400 lumens each, the sum gives 4.7, so five is the minimum. Six makes a tidy two by three grid and leaves headroom for a dimmer.

Step 3 - Space them evenly

Divide the room length by the number of fittings in a row to get the spacing, and start half a spacing in from the wall. In the example, 4.2 m divided by three gives 1.4 m between fittings and 0.7 m from each end wall. Across the room, 3.0 m divided by two gives 1.5 m between rows and 0.75 m from the side walls.

A quick sense check: spacing of about half the ceiling height to the full ceiling height works for most fittings. Narrow beam angles need closer spacing.

Tip. Line downlights up with the things people use, such as worktops, a dining table or a reading chair, instead of forcing a perfect grid across the whole ceiling.

Choosing the fitting

  • Fire-rated downlights where the ceiling protects the floor above from fire.
  • Insulation contact rated fittings where loft insulation will cover them.
  • Moisture protection in bathrooms, matched to the zone the fitting is in.
  • Colour temperature: warm white, around 2700 K, for living spaces and a cooler white for kitchens and bathrooms if you prefer it.

Common mistakes

  • A row of downlights tight against a wall, which throws scallops of light down it.
  • One switch for a large open-plan room. Split it into zones.
  • Forgetting the joists. Check which way they run before fixing the grid.

Lay it out on a plan

Draw the room to scale, drop the downlight symbols on the grid and check the spacing against the furniture. In RoomPlot you can then draw the lighting cable route, link the dimmer to the lights it controls with connections and export the layout for the client to approve before any holes are cut.

Frequently asked questions

How far apart should downlights be?

As a rule of thumb, between half the ceiling height and the full ceiling height apart, with half that distance to the walls. In a room with a 2.4 m ceiling that is roughly 1.2 m to 1.5 m.

How many downlights for a 4 by 4 m room?

At 150 lux, a 16 m² room needs about 2,400 lumens, which is six downlights of 400 lumens. A kitchen of the same size at 300 lux needs about twice that, or brighter fittings.

Do downlights need to be fire-rated?

Where a downlight is cut into a ceiling that forms a fire barrier, such as below a habitable floor, a fire-rated fitting keeps the ceiling's protection.

Free lesson. Want the full picture? Lighting and switching is part of our free electrical floor plans course, with interactive exercises.

Sources

Plan it on your phone. Space the downlights on a scaled plan, link them to their switches and share the layout before the ceiling goes up. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides