Electricians

The Future Homes Standard: What It Means for Electricians

The Future Homes Standard explained for electricians: the 2026 to 2028 timeline, solar and heat pumps on new homes, and what new-build electrical plans need.

3 min read · 20 November 2026 · RoomPlot Team

The Future Homes Standard changes how new homes in England are built: low-carbon heating instead of gas boilers and on-site renewable electricity, mostly solar panels. For electricians, that means more equipment on every new-build plan. Here is the timeline and what to plan for.

ENGLANDFuture Homes Standard timeline 24 Mar 2026 Standard published Regulations laid for England 24 Mar 2027 Rules take effect Transitional arrangements apply 2028 Solar and heat pumps Expected on most new homes
The Future Homes Standard timeline: published on 24 March 2026, taking effect from 24 March 2027, with solar and heat pumps expected on most new homes by 2028.

Key takeaways

  • The Future Homes Standard applies to new homes in England.
  • The requirements take effect on 24 March 2027, with transitional arrangements.
  • New homes get low-carbon heating and on-site solar as standard.
  • Electrical plans gain solar, heat pump, battery and EV equipment.

The timeline

  • 24 March 2026: the standard was published and the regulations laid for England.
  • 24 March 2027: the new requirements take effect, with transitional arrangements for projects already under way.
  • 2028: trade press reports that solar panels and heat pumps become standard on most new homes by then.

Dates and transitional rules differ between sources, so check the official guidance for each project.

FOR ELECTRICIANSWhat a new-build electrical plan now needs PLAN SPACE AND CAPACITY FOR Solar PV inverter and generation meter Heat pump supply and local isolator A battery location that follows PAS 63100 EV charge point (Approved Document S) CHECK EARLY Maximum demand and supply capacity Consumer unit size and spare ways Cable routes from roof to inverter Network operator notification
What a new-build electrical plan needs to make room for.

What changes on a new-build electrical plan

  • Solar PV: roof-to-inverter cable routes, the inverter and isolators, and the generation meter.
  • Heat pumps: a dedicated circuit and a local isolator for the outdoor unit, plus controls cabling.
  • Batteries: a location that follows PAS 63100 and the battery requirements in BS 7671.
  • EV charging: new homes with parking already need a charge point under Approved Document S.
  • Capacity: a larger consumer unit with spare ways, and an early check of maximum demand.

Check the rules. The Future Homes Standard applies in England. Scotland, Wales and Northern Ireland have their own building standards.

Frequently asked questions

Does the Future Homes Standard affect existing homes?

No. It sets requirements for new homes.

Does it apply across the UK?

It applies in England. Scotland, Wales and Northern Ireland have their own building standards.

What does it mean for consumer units?

More circuits and higher demand, so larger units with spare ways and an early check of maximum demand.

Free lesson. Want the full picture? UK rules for electrical plans is part of our free electrical floor plans course, with interactive exercises.

Sources

Plan it on your phone. Plan solar, heat pump, battery and EV supplies on one new-build electrical plan. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides