Electricians

Garden Electrics Plan: Outdoor Lights, Sockets and a Shed

Plan garden electrics: outdoor wall and path lights, a weatherproof socket and an armoured cable to a shed, with RCD protection, drawn on a plan.

3 min read · 20 November 2026 · RoomPlot Team

Garden lighting, an outdoor socket for the mower and power to a shed or garden office are some of the most requested small electrical jobs. They are also where planning matters most, because cables go underground and everything has to survive the weather. Draw it first and the job goes smoothly.

PATIO LAWN WP SWA House Shed Garden electrics Patio, path and a powered shed Armoured cable, buried To the shed and garden socket Outdoor lights On the house wall Path lights Buried lighting cable Connection (switch to light) SYMBOLS Outdoor light WP Waterproof double socket Consumer Unit Surface ceiling light Double socket One-way switch
Garden electrics: lights on the house wall, buried path lights, a weatherproof socket post and an armoured cable to a shed with its own small consumer unit.

Key takeaways

  • Buried garden cable is normally steel wire armoured, with warning tape above it.
  • Outdoor sockets and equipment used outdoors need 30 mA RCD protection.
  • Outdoor fittings need an IP rating that suits their position.
  • Keep the plan: it records where the cables are buried.

What to plan

  • Lights on the house wall by the back door and over the patio.
  • Path or garden lights along the way people actually walk.
  • A weatherproof socket for the mower, pressure washer or Christmas lights.
  • Power to a shed or garden office, often with its own small consumer unit.

Cables in the garden

Cable buried in the garden is normally armoured (SWA) and laid at a depth that protects it from digging, with warning tape above it. Draw the route on the plan as a dashed line, away from where people dig, and keep the plan: the next person to plant a tree will thank you.

Protection outdoors

Outdoor sockets and equipment used outdoors generally need 30 mA RCD protection, and all outdoor fittings need an IP rating suitable for their position. A new circuit to the garden or an outbuilding is also usually notifiable under Part P in England.

Check the rules. Burial depth, cable type and protection depend on the job and the current edition of BS 7671. A registered electrician should design and certify the installation.

Step by step

  1. Draw the house wall, patio, lawn and shed.
  2. Place the wall lights, path lights and outdoor socket.
  3. Draw the armoured cable route to the shed and the socket post.
  4. Add the shed's consumer unit, light, switch and sockets.
  5. Export the plan for the quote and keep it with the property records.

Frequently asked questions

Can I install an outdoor socket myself?

Outdoor work has to be done safely and to BS 7671, and a new circuit is notifiable in England. Using a registered electrician is the straightforward route.

What cable is used outdoors?

Steel wire armoured cable for buried and exposed runs.

Does a shed need its own consumer unit?

A shed with lighting and several sockets usually has a small consumer unit of its own. A single light or socket may not need one.

Free lesson. Want the full picture? Cable routes and schedules is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Map the garden, draw every buried cable and keep the plan on your phone for the next job. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides