Electricians

Home Network Cabling Plan: Cat6 Done Right

Plan home network cabling: Cat6 in a star from one cabinet to data outlets and ceiling Wi-Fi access points, with routes kept apart from mains cable.

3 min read · 20 November 2026 · RoomPlot Team

Wi-Fi is only as good as what feeds it. A small amount of Cat6 cable, planned properly, gives every room fast, stable internet and makes mesh Wi-Fi work the way it should. This guide shows how to plan a home network on a floor plan.

AP AP AP CABINET 6 6 6Kitchen Bathroom Bedroom Garage Home network Star wiring from one cabinet CIRCUITS (CABLE ROUTES) Cat6 data One cable per outlet, back to the cabinet SYMBOLS 6 Cat6 network outlet
Star wiring: each Cat6 cable runs from the network cabinet to one outlet or one ceiling access point.

Key takeaways

  • Use a star layout: every outlet has its own cable back to one cabinet.
  • Put outlets at the TV wall, the desk and any bedroom with a TV or desk.
  • Ceiling access points on Cat6, one per floor, improve Wi-Fi coverage.
  • Keep data cables apart from mains cables.

Use a star layout

Each data outlet and each access point gets its own cable back to one central cabinet. That is the star layout, and it is what makes a home network easy to manage, fault-find and upgrade.

Where to put outlets

  • The TV wall, behind the media unit.
  • The home office desk, two outlets if possible.
  • Bedrooms where a TV or desk will go.
  • The garage or garden office, for cameras or an outbuilding.

Wi-Fi access points

Ceiling-mounted access points, one per floor in a typical house, connected by Cat6 and powered over the same cable with Power over Ethernet, give much better coverage than a single router in the hall.

Check the rules. Amendment 4 to BS 7671, published in 2026, adds a new Section 716 for Power over Ethernet. Check the current edition when PoE equipment is part of the design.

Keep data apart from power

Data and mains cables should be segregated along their routes, especially where they run in parallel. Drawing data in its own colour on the plan makes that easy to check before cables go in.

Frequently asked questions

Cat5e or Cat6 for a home network?

Cat6 costs little more and handles faster speeds, so it is the usual choice for new cabling.

How many network points does a room need?

Two at a TV wall or desk is a good rule. A bedroom may only need one.

What is Power over Ethernet?

PoE sends power along the data cable, so an access point or camera needs only one cable.

Free lesson. Want the full picture? Cable routes and schedules is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Draw the cabinet, the outlets and the access points, then route every Cat6 run on the plan. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides