Electricians

How to Plan a House Rewire, Step by Step

Plan a full house rewire in eight steps: survey, agree points, design circuits, plan routes, first fix, plaster, second fix and certification.

3 min read · 20 November 2026 · RoomPlot Team

A full rewire is disruptive, so the planning has to be thorough. The jobs that go smoothly are the ones where every point was agreed on a plan before a single floorboard came up. This guide walks through the eight steps from survey to handover.

STEP BY STEPPlanning a full rewire BEFORE WORK STARTS 1 Survey and draw every room, existing points included 2 Agree new points room by room with the client 3 Group points into circuits and size each one 4 Plan cable routes and the consumer unit position ON SITE 5 First fix: cables, back boxes, the consumer unit tails 6 Plaster and make good 7 Second fix: accessories, fittings, labels 8 Test, certify, hand over the plan and the schedule
The eight steps of a rewire: four before work starts and four on site.

Key takeaways

  • Agree every point on a plan before work starts.
  • First fix is cables and back boxes. Second fix is accessories and fittings.
  • A rewire is notifiable work and ends with testing and a certificate.
  • Plan for what comes later: EV charging, a heat pump, solar and data.

Before work starts

  1. Survey every room. Scan or draw the whole house, and mark existing points, the consumer unit and the meter.
  2. Agree new points room by room. Walk the plan with the client and decide on every light, switch and socket. Changes are free on a plan and expensive on site.
  3. Design the circuits. Group points into lighting, socket, kitchen, cooker and any dedicated circuits, and size each one.
  4. Plan cable routes and the consumer unit position, including any move closer to the meter.

On site

  1. First fix: cables, back boxes and the consumer unit tails.
  2. Plaster and make good.
  3. Second fix: accessories, light fittings and labels.
  4. Test, certify and hand over the plan, the schedule and the certificate.

Check the rules. A rewire is notifiable work under Part P in England and must be designed, installed and certified to the current edition of BS 7671.

How long does it take?

A typical three-bedroom house often takes around a week or two of electrical work, longer if it is occupied, and the plastering adds more. A clear plan shortens the timeline, because nobody stops to decide where the next socket goes.

Things clients forget

  • Outdoor lights and sockets, and power to the garage or shed.
  • Data cabling while the floors are up.
  • Space in the consumer unit for an EV charger, heat pump or solar later.
  • Smoke and heat alarms, mains powered and interlinked.

Frequently asked questions

How long does a house rewire take?

A typical three-bedroom house often takes a week or two of electrical work, longer if it is occupied.

Can you live in a house during a rewire?

It is possible but disruptive: floors are lifted and the power is off for periods. Many people move out for at least part of it.

How do I know if my house needs rewiring?

Signs include an old fuse board, rubber or fabric-insulated cables, scorch marks and frequent tripping. An EICR gives a proper answer.

Free lesson. Want the full picture? A worked example is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Survey the house, agree every point with the client on screen and keep the plan for second fix and handover. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides