Module 5 · Putting it together · Lesson 16 of 18

Worked example: from survey to a finished plan

Free lesson: follow a complete electrical floor plan for a small flat, from the base plan to switching, circuits and export.

10 min · 0 XP · 0 of 18 lessons done

Lesson 16 of 18 All lessons
  1. 1What an electrical floor plan is, and who uses it
  2. 2Electrical symbols: lights, switches, sockets and distribution
  3. 3Circuits explained: lighting, rings, radials and dedicated supplies
  4. 4Drawing the base plan: measuring, doors and fixed fittings
  5. 5Lighting and switching: one-way, two-way and intermediate
  6. 6Sockets and spurs: how many, where, and on which circuit
  7. 7Kitchens and bathrooms: special rules for special rooms
  8. 8Cable routes, lengths and circuit schedules
  9. 9Dedicated circuits: showers, cookers, EV chargers and outbuildings
  10. 10UK rules: BS 7671, Part P and what applies where
  11. 11UK protection: consumer units, RCD types and surge protection
  12. 12UK earthing systems, mounting heights and certificates
  13. 13US rules: the NEC, receptacle spacing, GFCI and AFCI
  14. 14US kitchens and bathrooms: receptacle rules on the plan
  15. 15US panels, GFCI, AFCI and wire sizes
  16. 16Worked example: from survey to a finished plan
  17. 17Checking your plan and handing it over
  18. 18Final test: check what you have learned

In this lesson

  • Work in order: base plan, points, switching, circuits, checks.
  • Every element on the sheet should be explained by the legend.
  • Export a PDF for the client and keep the plan for second fix.

Time to put it all together. This worked example follows a small flat from base plan to finished electrical layout.

C1 C3 1 2 3 4 5 Living / kitchen Bedroom Bathroom Hall Bedroom 2 Reading the plan Numbers match the steps in the guide C1 Lighting Cable route C3 Sockets ring Leaves and returns to the CU Callouts 1 to 5 Explained in the text Connection (switch to light) SYMBOLS Pendant fixture light Recessed ceiling light One-way switch Double socket Fused spur Smoke Alarm Consumer Unit
The finished flat. Callouts 1 to 5 mark a light symbol, a switch connection, a cable route, a circuit tag and the consumer unit.

1. Base plan

The flat has an open-plan living and kitchen area, two bedrooms, a bathroom and a hall. Doors are drawn with their swings and the kitchen and bathroom fittings are in place.

2. Points

A pendant and downlights in the living and kitchen area, pendants in the bedrooms and hall, a recessed light in the bathroom, sockets around the living area and a fused spur in the kitchen. A smoke alarm sits in the hall.

3. Switching

Each switch has a connection to the lights it controls (callout 2). The bathroom light is switched from the hall.

4. Circuits

The lighting circuit (C1) runs from the consumer unit through every light (callout 3). The socket ring (C3) loops round the living area and back (callout 4). Both start at the consumer unit (callout 5).

5. Check and export

Check every symbol is in the legend, every light has a switch and every circuit returns to the board. Then export a PDF for the client.

Try it

Draw the same flat yourself, or your own home, and work through the five steps in order.

Check your understanding

Official documents and further reading

Progress is saved in this browser.

Go deeper: related guides

Electricians How to Draw an Electrical Plan on iPhone or iPad Draw an electrical floor plan on iPhone or iPad in six steps with RoomPlot: scan or draw, place symbols, link switches, route cables and export. 3 min read Electricians How to Read an Electrical Plan: A Beginner's Guide Learn to read an electrical floor plan in five steps: symbols, switch connections, cable routes, circuits and the consumer unit, with a worked example. 3 min read Electricians Mains Smoke Alarm Wiring Plan: Interlinked Alarms on a Floor Plan Plan mains-powered interlinked smoke and heat alarms on a floor plan: BS 5839-6 grades and categories, where each alarm goes and how the interlink runs. 3 min read