Module 5 · Putting it together · Lesson 18 of 18

Final test: check what you have learned

Free final test for the electrical floor plans course: 15 multiple-choice questions on symbols, circuits, switching, UK rules and US rules, with instant feedback.

8 min · 0 XP · 0 of 18 lessons done

Lesson 18 of 18 All lessons
  1. 1What an electrical floor plan is, and who uses it
  2. 2Electrical symbols: lights, switches, sockets and distribution
  3. 3Circuits explained: lighting, rings, radials and dedicated supplies
  4. 4Drawing the base plan: measuring, doors and fixed fittings
  5. 5Lighting and switching: one-way, two-way and intermediate
  6. 6Sockets and spurs: how many, where, and on which circuit
  7. 7Kitchens and bathrooms: special rules for special rooms
  8. 8Cable routes, lengths and circuit schedules
  9. 9Dedicated circuits: showers, cookers, EV chargers and outbuildings
  10. 10UK rules: BS 7671, Part P and what applies where
  11. 11UK protection: consumer units, RCD types and surge protection
  12. 12UK earthing systems, mounting heights and certificates
  13. 13US rules: the NEC, receptacle spacing, GFCI and AFCI
  14. 14US kitchens and bathrooms: receptacle rules on the plan
  15. 15US panels, GFCI, AFCI and wire sizes
  16. 16Worked example: from survey to a finished plan
  17. 17Checking your plan and handing it over
  18. 18Final test: check what you have learned

In this lesson

  • The pass mark is 80%: 12 of the 15 questions.
  • Every answer comes with an explanation.
  • You can retake the test as often as you like.

You have worked through symbols, circuits, switching, sockets, special rooms, cable routes and the UK and US rules. This last step checks that it has stuck.

USB EV C1 C2 C3 C4 C5 C6 Kitchen Bathroom Bedroom Garage Electrical layout Ground floor, RoomPlot symbols CIRCUITS (CABLE ROUTES) C1 Lighting 1.5 mm² · 6 A RCBO C2 Kitchen ring 2.5 mm² · 32 A RCBO C3 Sockets ring 2.5 mm² · 32 A RCBO C4 Cooker 6 mm² · 32 A RCBO C5 Garage radial 2.5 mm² · 20 A RCBO C6 EV charger 6 mm² · 32 A · Type A + RDC-DD SYMBOLS Pendant fixture light Surface ceiling light Recessed ceiling light One-way switch Two-way switch Dimmer switch Double socket USB Double socket & USB Fused spur Cooker Control Unit Consumer Unit EV EV Charger (EV)
By now you can read every part of this plan: the symbols, the connections, the circuits and the consumer unit.

How the test works

  • 15 questions: seven general, four on UK rules and four on US rules.
  • Instant feedback: each answer shows the reason straight away.
  • Pass mark 80%: 12 correct answers. Retake it whenever you like.

If you only work in one country, you can still answer the other questions: the ideas are the same and only the names and numbers change.

What next

The best practice is a real room. Scan or draw one, place the points, link the switches, route the circuits and export the plan. Then do the next room. The guides linked in each lesson go deeper on every topic.

This course teaches you to read and draw electrical plans. It does not qualify you to carry out electrical work, which must be done by a competent person and to the rules where you live.

Check your understanding

Official documents and further reading

Progress is saved in this browser.

Go deeper: related guides

Electricians Electrical Floor Plan: How to Draw One Electricians Can Wire From Draw an electrical floor plan that installers can wire from: symbols, circuits, cable routes, colours and a schedule, on iPhone or iPad with RoomPlot. 5 min read Electricians How to Read an Electrical Plan: A Beginner's Guide Learn to read an electrical floor plan in five steps: symbols, switch connections, cable routes, circuits and the consumer unit, with a worked example. 3 min read Electricians How to Draw an Electrical Plan on iPhone or iPad Draw an electrical floor plan on iPhone or iPad in six steps with RoomPlot: scan or draw, place symbols, link switches, route cables and export. 3 min read