Lesson 1 of 18 All lessons
- 1What an electrical floor plan is, and who uses it
- 2Electrical symbols: lights, switches, sockets and distribution
- 3Circuits explained: lighting, rings, radials and dedicated supplies
- 4Drawing the base plan: measuring, doors and fixed fittings
- 5Lighting and switching: one-way, two-way and intermediate
- 6Sockets and spurs: how many, where, and on which circuit
- 7Kitchens and bathrooms: special rules for special rooms
- 8Cable routes, lengths and circuit schedules
- 9Dedicated circuits: showers, cookers, EV chargers and outbuildings
- 10UK rules: BS 7671, Part P and what applies where
- 11UK protection: consumer units, RCD types and surge protection
- 12UK earthing systems, mounting heights and certificates
- 13US rules: the NEC, receptacle spacing, GFCI and AFCI
- 14US kitchens and bathrooms: receptacle rules on the plan
- 15US panels, GFCI, AFCI and wire sizes
- 16Worked example: from survey to a finished plan
- 17Checking your plan and handing it over
- 18Final test: check what you have learned
In this lesson
- An electrical floor plan shows where every point goes and which circuit feeds it.
- It is drawn on top of an accurate floor plan, to scale.
- Electricians, clients, designers and inspectors all read the same sheet.
An electrical floor plan is a drawing of a building, to scale, showing where every electrical point goes: lights, switches, sockets, spurs, alarms, the consumer unit or panel, and the circuits that connect them. It is the single sheet that everyone on a job reads, from the client agreeing the layout to the electrician pulling cable.
What it shows
- The building: walls, doors with their swings, windows and fixed fittings, to scale.
- Every point, each drawn with a recognised symbol.
- Switching: which switch controls which light.
- Circuits and cable routes: how points are grouped and how the cable gets there.
- A legend and a schedule that make the drawing readable without asking questions.
Who uses it
- Clients agree where things go before anything is chased into a wall.
- Electricians quote, install and test from it.
- Designers and builders coordinate with kitchens, joinery and heating.
- Inspectors and future electricians use it to understand what was installed.
Floor plan, schematic or wiring diagram?
A floor plan shows positions in the building. A schematic shows how a circuit works, regardless of position. A wiring diagram shows conductors and terminals. Domestic jobs mostly need the floor plan plus a circuit schedule; schematics are used to explain tricky parts such as two-way switching.
The rules behind it
The plan itself is not a legal document, but the installation it describes has to comply with the wiring rules where you work: BS 7671 in the UK and the National Electrical Code (NFPA 70), as adopted locally, in the US. The UK and US modules cover both.
Try it
Find an old floor plan of your own home, or draw one, and list every light, switch and socket you can see in each room. You have just made the first draft of an electrical plan.