Module 2 · Designing a layout · Lesson 6 of 18

Sockets and spurs: how many, where, and on which circuit

Free lesson: place sockets around real furniture, choose doubles and USB, and understand spurs and ring rules.

7 min · 0 XP · 0 of 18 lessons done

Lesson 6 of 18 All lessons
  1. 1What an electrical floor plan is, and who uses it
  2. 2Electrical symbols: lights, switches, sockets and distribution
  3. 3Circuits explained: lighting, rings, radials and dedicated supplies
  4. 4Drawing the base plan: measuring, doors and fixed fittings
  5. 5Lighting and switching: one-way, two-way and intermediate
  6. 6Sockets and spurs: how many, where, and on which circuit
  7. 7Kitchens and bathrooms: special rules for special rooms
  8. 8Cable routes, lengths and circuit schedules
  9. 9Dedicated circuits: showers, cookers, EV chargers and outbuildings
  10. 10UK rules: BS 7671, Part P and what applies where
  11. 11UK protection: consumer units, RCD types and surge protection
  12. 12UK earthing systems, mounting heights and certificates
  13. 13US rules: the NEC, receptacle spacing, GFCI and AFCI
  14. 14US kitchens and bathrooms: receptacle rules on the plan
  15. 15US panels, GFCI, AFCI and wire sizes
  16. 16Worked example: from survey to a finished plan
  17. 17Checking your plan and handing it over
  18. 18Final test: check what you have learned

In this lesson

  • Place sockets where the furniture will be.
  • Unfused spurs: one single or double socket each; fused spurs feed fixed equipment.
  • Socket circuits generally need 30 mA RCD protection in the UK.

Too few sockets is the most common regret after a renovation. This lesson shows how to place them properly and connect them on the right circuit.

Sofa TV unit Armchair USB Living room From the consumer unit MEDIA WALL Living room sockets Six double sockets on one ring C3 Sockets ring 2.5 mm² on a 32 A RCBO Media wall TV, router, speakers, games SYMBOLS Double socket USB Double socket & USB
Six double sockets placed around the furniture, on one ring final circuit.

Place sockets around the furniture

  1. Place the furniture on the plan first.
  2. Put double sockets beside everything that needs power: TV wall, sofa ends, bedsides, desks.
  3. Fill any wall that has no socket.
  4. Add USB sockets where phones get charged.

Rings, radials and spurs

One ring final circuitSockets on the loop, spurs as branches, both ends on one 32 A way Consumer unit, B32 Unfused spurone single or double socket Fused spurto a fixed appliance Ring final, 2.5 mm²up to 100 m² of floor
A ring with sockets on the loop, an unfused spur and a fused spur to a fixed appliance.

On a UK ring, sockets sit on the loop and spurs branch off it. An unfused spur feeds one single or one double socket; a fused spur feeds fixed equipment. In the US, receptacles are on radial branch circuits and the NEC sets minimum spacing, covered in lesson 10.

Protection

UK socket circuits rated up to 32 A generally need 30 mA RCD protection, and AFDDs are required in some buildings such as HMOs and recommended elsewhere.

Try it

Draw your living room with its furniture and place every double socket you would want. Then draw the ring through them.

Check your understanding

Official documents and further reading

Progress is saved in this browser.

Go deeper: related guides

Electricians How Many Sockets Do You Need in Each Room? A room-by-room guide to how many double sockets to plan in a UK home, where to put them, and how to draw the layout before first fix. 3 min read Electricians How Many Sockets Can You Have on a Ring Main? How many sockets can go on a ring main: the 100 m² floor area guide, spurs, fused spurs and when to add a second ring, explained simply. 3 min read Electricians Ring Final Circuit on a Floor Plan: How to Draw and Check It Draw a ring final circuit on a floor plan: 2.5 mm² on 32 A, the 100 m² guide, spurs, radial alternatives, RCD and AFDD protection, shown clearly. 4 min read