Module 5 · Putting it together · Lesson 17 of 18

Checking your plan and handing it over

Free lesson: a checklist for reviewing an electrical floor plan, common beginner mistakes, and what goes into the handover pack.

6 min · 0 XP · 0 of 18 lessons done

Lesson 17 of 18 All lessons
  1. 1What an electrical floor plan is, and who uses it
  2. 2Electrical symbols: lights, switches, sockets and distribution
  3. 3Circuits explained: lighting, rings, radials and dedicated supplies
  4. 4Drawing the base plan: measuring, doors and fixed fittings
  5. 5Lighting and switching: one-way, two-way and intermediate
  6. 6Sockets and spurs: how many, where, and on which circuit
  7. 7Kitchens and bathrooms: special rules for special rooms
  8. 8Cable routes, lengths and circuit schedules
  9. 9Dedicated circuits: showers, cookers, EV chargers and outbuildings
  10. 10UK rules: BS 7671, Part P and what applies where
  11. 11UK protection: consumer units, RCD types and surge protection
  12. 12UK earthing systems, mounting heights and certificates
  13. 13US rules: the NEC, receptacle spacing, GFCI and AFCI
  14. 14US kitchens and bathrooms: receptacle rules on the plan
  15. 15US panels, GFCI, AFCI and wire sizes
  16. 16Worked example: from survey to a finished plan
  17. 17Checking your plan and handing it over
  18. 18Final test: check what you have learned

In this lesson

  • Check switching, circuits, symbols and legend before you share.
  • Update the plan during the job so the as-installed version is ready.
  • Hand over the plan with the certificate and schedule.

A plan is only useful if it is right. This last lesson gives you a checklist and shows what to hand over at the end of a job.

HANDOVERWhat goes in the handover pack DRAWINGS As-installed electrical floor plan, every floor Circuit colours and names matching the board Cable routes, including hidden runs Legend generated from the symbols used CERTIFICATES AND RECORDS Electrical Installation Certificate Schedule of circuits and test results Building control notice where required Manuals for chargers, alarms and fittings
The handover pack: as-installed drawings plus the certificates and records.

Checklist before you share

  • Every light has a switch, and every switch has a connection.
  • Every point belongs to a circuit, and every circuit returns to the board.
  • One symbol style per device, and every symbol in the legend.
  • Switches on the latch side of doors, sockets where the furniture is.
  • Kitchen and bathroom rules followed.
  • Circuit names match the schedule.

Common beginner mistakes

  • Placing symbols before the furniture and fittings.
  • Drawing cables straight across rooms.
  • Forgetting outdoor lights, alarms and data.
  • Using the plan's circuit colours as if they were conductor colours.

Handover

Give the client the as-installed plan, the circuit schedule, the certificate and any notification, plus manuals. Keep a copy: it makes the next job, or the next inspection, much faster.

One step left: the final test in the next lesson. Then keep practising on real rooms, and use the guides linked in each lesson to go deeper.

Check your understanding

Official documents and further reading

Progress is saved in this browser.

Go deeper: related guides

Electricians Electrical Handover Pack: Drawings and Records to Give the Client What goes in an electrical handover pack: as-installed floor plans, circuit schedule, certificates, notifications and manuals, and how to prepare them. 3 min read