Too few sockets is the most common regret after a renovation: extension leads behind the sofa, a phone charger in the hallway and a TV corner with one double socket for six devices. Planning sockets on a floor plan before first fix costs nothing and solves it for good. This guide gives practical numbers for each room and shows how to place them.
There is no legal minimum, but there is good practice
BS 7671 tells you how to wire sockets safely; it does not tell you how many to fit. The numbers below are common recommendations from house builders and guidance for new homes. Treat them as a starting point, then add sockets wherever the furniture plan says people will need them.
| Room | Typical double sockets | Where they matter |
|---|---|---|
| Living room | 5 to 8 | Media wall, both ends of the sofa, reading corners |
| Kitchen | 6 to 10 | Along the worktop, plus spurs for appliances |
| Main bedroom | 4 to 6 | Both sides of the bed, dressing table, TV |
| Other bedrooms | 3 to 4 | Bed, desk, one spare wall |
| Home office | 3 to 4 | At the desk, with data outlets |
| Hall and landing | 1 to 2 | Vacuum cleaner, lamp, router |
Key takeaways
- There is no legal minimum number of sockets, only good practice.
- Plan sockets around the furniture, not the empty room.
- Fit doubles almost everywhere, with USB by beds, sofas and desks.
- In new homes in England, sockets sit between 450 mm and 1200 mm above the floor.
Place sockets where the furniture will be
- Draw the room first. Scan it with LiDAR or draw the walls, doors and windows.
- Add the furniture. Sofa, bed, desk, TV unit. The furniture decides where sockets are useful.
- Place sockets on the walls next to each piece that needs power, then fill the gaps so no wall is left without one.
- Choose double sockets almost everywhere. A double costs little more than a single.
- Add USB sockets by beds, sofas and desks, where phones get charged.
Tip. Group sockets on the media wall and run data cable to the same spot. TVs, routers, consoles and speakers all live there.
Height and access
For new homes in England, Approved Document M points sockets and switches to between 450 mm and 1200 mm above the finished floor, so they can be reached easily. Keep sockets clear of radiators and away from where a door will open over them.
Wire them on the right circuit
Most UK homes feed sockets from ring final circuits, usually one per floor plus a separate circuit for the kitchen. Socket circuits rated up to 32 A also need 30 mA RCD protection. Once the sockets are on the plan, drawing the ring is quick, and the plan becomes the brief for the electrician.
Frequently asked questions
How many sockets should a living room have?
Five to eight doubles is a common recommendation, concentrated at the media wall and at both ends of the sofa.
How many sockets should a bedroom have?
Four to six doubles in a main bedroom, including one each side of the bed, and three to four in other bedrooms.
Is it worth fitting USB sockets?
By beds, sofas and desks, yes. Elsewhere a standard double socket is more flexible.
Free lesson. Want the full picture? Sockets and spurs is part of our free electrical floor plans course, with interactive exercises.
Plan it on your phone. Place every socket where the furniture really is, then hand your electrician a plan instead of a list. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.