Electricians

Electrical Floor Plan: How to Draw One Electricians Can Wire From

Draw an electrical floor plan that installers can wire from: symbols, circuits, cable routes, colours and a schedule, on iPhone or iPad with RoomPlot.

5 min read · 20 November 2026 · RoomPlot Team

An electrical floor plan is the drawing an electrician works from: where every light, switch, socket and spur goes, which circuit feeds it, and how the cables get back to the consumer unit. Done well, it settles arguments before the first floorboard comes up. This guide shows what a professional electrical plan contains and how to build one on an iPhone or iPad with RoomPlot.

What an electrical floor plan has to show

A sketch with a few circles is not enough to quote, install or certify from. A plan an installer can actually wire from shows:

  • An accurate base plan - walls, doors with their swings, windows and fixed kitchen and bathroom fittings, because they decide where accessories can and cannot go.
  • Every point - lights, switches, sockets, fused spurs, cooker control, extractor fans, alarms and the consumer unit, each drawn with a consistent symbol.
  • Which switch controls which light, so nobody has to guess the switching arrangement.
  • Circuits and cable routes, each circuit in its own colour, so the loading and the protective device for every point are obvious.
  • A legend and a circuit schedule that match the drawing.
USB EV C1 C2 C3 C4 C5 C6 Kitchen Bathroom Bedroom Garage Electrical layout Ground floor, RoomPlot symbols CIRCUITS (CABLE ROUTES) C1 Lighting 1.5 mm² · 6 A RCBO C2 Kitchen ring 2.5 mm² · 32 A RCBO C3 Sockets ring 2.5 mm² · 32 A RCBO C4 Cooker 6 mm² · 32 A RCBO C5 Garage radial 2.5 mm² · 20 A RCBO C6 EV charger 6 mm² · 32 A · Type A + RDC-DD SYMBOLS Pendant fixture light Surface ceiling light Recessed ceiling light One-way switch Two-way switch Dimmer switch Double socket USB Double socket & USB Fused spur Cooker Control Unit Consumer Unit EV EV Charger (EV)
A complete electrical layout drawn with RoomPlot symbols: six circuits, each cable route in its own colour, all returning to the consumer unit in the garage.

Key takeaways

  • An electrical floor plan shows every point, which switch controls which light and how each circuit runs back to the consumer unit.
  • Start from a measured base plan: scan the rooms with LiDAR or draw the walls by hand.
  • Use one symbol family per plan and give every circuit its own colour.
  • Export the plan with its legend and cable schedule so the drawing and the paperwork agree.

Step 1 - Start from a measured plan

Electrical design is only as good as the plan underneath it. On a LiDAR iPhone or iPad Pro, scan each room and RoomPlot builds the walls, doors and windows for you; on any other device, draw the walls by hand with snapping. Room areas are calculated automatically, which matters later: socket circuit guidance in the UK is framed around floor area, so a 34 m² bedroom and a 74 m² garage get treated differently.

Step 2 - Place the symbols

Open the Electrical library and set the filter to UK or US. The library holds hundreds of electrical symbols grouped the way you think on site: Lighting, Switches, Sockets & Spurs, Ventilation, Heating, Communication, Power & Distribution, Safety and more. Use one family per plan so a reader recognises every point at a glance: the same one-way, two-way and intermediate switch style, and the same socket and spur style throughout. See our guide to RoomPlot for electricians for the full symbol board.

Add a Connection from each switch to the lights it controls. Connections are drawn as red curved links by default and describe the relationship, not the physical cable, so they never count towards cable quantities. Two-way and intermediate switching becomes self-explanatory: two or three switches, all linked to the same light.

Step 4 - Draw cable routes and group them into circuits

Switch to Cable route and draw the physical run from the consumer unit to each point. Choose straight, right-angle or curved routing, add junctions and branches where a run splits, and assign every route to a circuit. Each circuit carries its own colour, so the lighting radial, a ring final and a dedicated cooker circuit read as separate systems on the same sheet. Cable presets keep the specification, colour and label style consistent from one job to the next.

Step 5 - Get the conductor colours right

The plan uses circuit colours to tell circuits apart. On site, the conductors follow the harmonised colours: brown for line, blue for neutral and green-and-yellow for the protective conductor. In twin and earth the protective conductor is bare and has to be sleeved green-and-yellow wherever it is terminated. In three-core and earth used for two-way switching, the grey and black cores carry line voltage, so they are sleeved brown at their terminations.

Twin and earth, 2.5 mm²6242Y: ring and radial socket circuits Brown: line (L) Blue: neutral (N) Bare CPC, sleeved green/yellow Three-core and earth, 1.5 mm²6243Y: two-way and intermediate switching Brown: common Grey: strapper L1, brown sleeve Black: strapper L2, brown sleeve Bare CPC, sleeved green/yellow
Twin and earth and three-core and earth, with the green-and-yellow sleeve on the bare CPC and the brown sleeves on switching strappers.

Step 6 - Export the plan and the paperwork

Export a branded PDF report with the plan, a wiring legend and the cable schedule, an image for the client, or a DXF when a designer wants the geometry in CAD. Multi-storey jobs keep each floor on its own page, and cable runs that pass between floors are carried by paired markers so the riser reads on both sheets. Our guides to PDF reports, DXF export and multi-floor plans cover each export in detail.

Check the standard. In the UK, design and install to the current edition of BS 7671 (BS 7671:2018+A4:2026 at the time of writing), and remember that a new circuit, a consumer unit change or work in a bathroom is usually notifiable under Part P in England. In the US, follow the NEC edition your jurisdiction has adopted.

Common mistakes

  • Mixing symbol families on one sheet, so a dimmer looks like a socket.
  • No switching shown. A light without a link to its switch invites guesswork.
  • One colour for every cable, which hides circuit loading and makes the schedule hard to check.
  • No legend. The reader should never need to ask what a symbol means.

Map the property, place the points, link the switches and route the circuits on the device in your pocket, then hand over a plan the whole team can wire from.

Frequently asked questions

What is the difference between an electrical plan and a wiring diagram?

A plan shows where points and cable routes are in the building. A wiring diagram shows how the conductors connect at each terminal. The plan is the one you agree with the client.

Do I need CAD software to draw an electrical plan?

No. A phone or tablet app such as RoomPlot can scan or draw the rooms, place symbols, route cables and export a PDF or DXF.

What scale should an electrical floor plan be?

1:50 is common for one floor of a house and 1:100 for larger properties. What matters most is that the plan is measured, so lengths taken from it are realistic.

Free lesson. Want the full picture? What is an electrical floor plan? is part of our free electrical floor plans course, with interactive exercises.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides