Electricians

How to Read an Electrical Plan: A Beginner's Guide

Learn to read an electrical floor plan in five steps: symbols, switch connections, cable routes, circuits and the consumer unit, with a worked example.

3 min read · 20 November 2026 · RoomPlot Team

An electrical plan looks busy the first time you see one: circles, lines, colours and little numbers everywhere. Once you know what to look for, it reads like a map. This beginner's guide walks through a real example in five steps, so you can check a quote, follow an electrician's design or start drawing your own.

C1 C3 1 2 3 4 5 Living / kitchen Bedroom Bathroom Hall Bedroom 2 Reading the plan Numbers match the steps in the guide C1 Lighting Cable route C3 Sockets ring Leaves and returns to the CU Callouts 1 to 5 Explained in the text Connection (switch to light) SYMBOLS Pendant fixture light Recessed ceiling light One-way switch Double socket Fused spur Smoke Alarm Consumer Unit
A worked example. The numbers match the five steps below: a light symbol, a switch connection, a cable route, a circuit tag and the consumer unit.

Key takeaways

  • Start with the legend: it explains every symbol on the sheet.
  • Thin red curves are connections that show which switch controls which light.
  • Thick coloured lines are cable routes, with one colour per circuit.
  • Every circuit starts at the consumer unit.

Step 1 - Find the symbols

Every point is drawn with a symbol. Lights are the easiest to spot: in RoomPlot they have a yellow housing, with a pendant shown as a small circle with four ticks and a recessed downlight as a circle with diagonal ticks. Sockets are a circle with stems that touch the wall, and switches are a small circle with a stem. If you are unsure, check the legend: it lists every symbol used on the sheet.

Step 2 - Follow the switch connections

The thin red curves are connections. They do not show cable; they tell you which switch controls which light. In the example, the living room switch controls the pendant and the kitchen switch controls both downlights. Two switches linked to the same light means two-way switching.

Step 3 - Trace the cable routes

The thick coloured lines are cable routes, the physical runs from the consumer unit to each point. Right-angle bends show the cable following walls and joists. Where a route splits there is a small black dot, a junction.

Step 4 - Read the circuit tags

Each cable route belongs to a circuit, and each circuit has its own colour and a tag such as C1 or C3. Here, C1 (yellow) is the lighting circuit and C3 (teal) is a ring of sockets that leaves the consumer unit and comes back to it. The colours on the plan are only for reading the drawing; they are not the colours of the wires inside the cable.

Step 5 - Find the consumer unit

The consumer unit, often called the fuse box, is where every circuit starts. Its symbol is a box with a row of ways. On a good plan the circuit names on the drawing match the labels on the board, so you can see at a glance which breaker controls which room.

Tip. Read the legend first, then the plan. Two minutes with the key saves twenty minutes of guessing.

What a good plan always includes

  • An accurate floor plan with doors, windows and fixed fittings.
  • One consistent symbol style for each kind of device.
  • Switch connections, so switching is never left to guesswork.
  • Cable routes grouped into named, coloured circuits.
  • A legend and a circuit schedule that match the drawing.

For the basics of plans in general, see our guide on how to read a floor plan.

Frequently asked questions

What do the lines on an electrical plan mean?

Thick coloured lines are cable routes grouped into circuits. Thin curved lines link switches to the lights they control.

What does C1 or C2 mean on a plan?

It is a circuit tag. Each circuit has a number, a colour and a matching way in the consumer unit.

Are the colours on the plan the colours of the wires?

No. Plan colours only tell the circuits apart. The conductors inside the cable follow the standard colours.

Free lesson. Want the full picture? What is an electrical floor plan? is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Scan or draw the property, drop in lights, switches and sockets, and RoomPlot builds the legend for you. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides