Electricians

How to Draw an Electrical Plan on iPhone or iPad

Draw an electrical floor plan on iPhone or iPad in six steps with RoomPlot: scan or draw, place symbols, link switches, route cables and export.

3 min read · 20 November 2026 · RoomPlot Team

Electrical plans used to mean a CAD seat in the office or a sketch on the back of a quote. Today the whole plan can be drawn on site, on the phone in your pocket. This guide shows the six steps in RoomPlot.

IN ROOMPLOTAn electrical plan in six steps DRAW 1 Scan with LiDAR or draw the walls 2 Open Electrical and pick UK or US 3 Place lights, switches, sockets and the CU WIRE AND SHARE 4 Link each switch to its lights 5 Draw cable routes and set circuits 6 Export a PDF report, image or DXF
Six steps to an electrical floor plan in RoomPlot.

Key takeaways

  • Scan rooms with LiDAR or draw the walls by hand.
  • Choose UK or US naming and place symbols from the Electrical library.
  • Link switches to lights with connections and draw cable routes as coloured circuits.
  • Export a PDF with the legend and cable schedule, an image or a DXF.

1. Scan or draw the property

On a LiDAR iPhone or iPad Pro, scan each room and RoomPlot builds the walls, doors and windows. On any other device, draw the walls by hand with snapping. Multi-floor properties keep each floor in one project. See LiDAR scan vs manual drawing for which to use.

2. Open the Electrical library

Choose UK or US symbols, then browse by group: Lighting, Switches, Sockets & Spurs, Ventilation, Heating, Communication and more. The library holds hundreds of electrical symbols, and you can search or favourite the ones you use most.

3. Place the points

Drop lights, switches, sockets, spurs and the consumer unit onto the plan, and rotate them to the wall.

Add a Connection from each switch to the lights it controls. Two-way and intermediate switching become obvious at a glance, and connections never count as cable.

5. Draw cable routes and circuits

Draw each cable route as straight, right-angle or curved, add branches, and assign it to a circuit with its own colour. Routes show their length on plan, and a height allowance turns that into a cable estimate.

6. Export and share

Export a branded PDF report with the legend and cable schedule, an image for the client, or a DXF for CAD. See our guides to PDF reports and DXF export.

Tip. Save your usual cable specifications as presets. Every new route then starts with the right colour, label and specification.

Frequently asked questions

Can I draw an electrical plan on an iPhone?

Yes. RoomPlot scans or draws the rooms, places electrical symbols, routes cables and exports the finished plan.

Do I need a LiDAR iPhone?

No. LiDAR makes capturing rooms faster, but you can draw the walls by hand on any supported iPhone or iPad.

Can I export the plan to CAD?

Yes. RoomPlot exports DXF as well as PDF and image files.

Free lesson. Want the full picture? Drawing the base plan is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Everything above happens in one app on your iPhone or iPad. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides