Electricians

Kitchen Extension Electrical Plan: Step by Step

Plan the electrics for a kitchen extension: a new ring, cooker circuit, island power, pendants and dimmable downlights, joined to the existing house.

3 min read · 20 November 2026 · RoomPlot Team

A kitchen extension is often the biggest electrical job in a renovation: new circuits, an island, more lighting and appliances that all need power and isolation. Planning it on a floor plan before the steels go in saves expensive changes later.

EXISTING Island Existing house Kitchen extension Kitchen extension New ring, cooker circuit and island power C2 Kitchen ring Wall sockets and island C4 Cooker To the control unit C1 Lighting Downlights and pendants Connection (switch to light) SYMBOLS Double socket Fused spur Cooker Control Unit Recessed ceiling light Pendant fixture light Dimmer switch One-way switch
A kitchen extension plan: worktop sockets, a cooker control unit, island sockets, pendants over the island and dimmable downlights, with the existing house above.

Key takeaways

  • Check the consumer unit and the supply capacity first.
  • Draw the kitchen layout before any socket or light.
  • Plan island power before the floor goes down.
  • New circuits in an extension are notifiable in England.

Step 1 - Check the supply and the consumer unit

Extensions add load. Check the existing consumer unit has spare ways and that the supply can take an induction hob, extra appliances and perhaps a heat pump or EV charger later. It is far cheaper to upgrade now than after plastering.

Step 2 - Draw the kitchen layout

Draw the extension, then the worktops, island, sink, hob and appliance positions. The layout decides where every socket, spur and light goes. See also our guide to drawing a kitchen floor plan.

Step 3 - Power

  • A dedicated kitchen ring or radial for the worktop sockets.
  • A cooker circuit to a cooker control unit beside the hob, never above it.
  • Fused spurs you can reach, to isolate integrated appliances.
  • Power to the island, planned before the floor is laid.

Step 4 - Lighting

  • Dimmable downlights for general light.
  • Pendants over the island on their own switch.
  • Under-cabinet lights over the worktop, so you never work in your own shadow.

Tip. Put switches where you enter the extension from the house, and a second set by the garden doors if people come in that way.

Step 5 - Paperwork

New circuits in a kitchen extension are notifiable under Part P in England, and the extension itself needs Building Regulations approval. A clear plan is part of that record, and it gives the client something to agree before anything is chased into a wall.

Frequently asked questions

Do I need a new consumer unit for an extension?

Only if the existing one has no spare ways or cannot give the protection the new circuits need. Check early.

How do you get power to a kitchen island?

Through a duct or cable laid in the floor before the screed, which is why it has to be planned early.

What lighting works best in a kitchen extension?

Dimmable downlights for general light, pendants over the island on their own switch and under-cabinet lights over the worktops.

Free lesson. Want the full picture? Kitchens and bathrooms is part of our free electrical floor plans course, with interactive exercises.

Plan it on your phone. Draw the extension, place the island and the appliances, and route every circuit before the builders start. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.

Related guides

Electricians AFCI Requirements Explained: Which Rooms Need Arc-Fault Protection AFCI protection explained for US homes: what an arc fault is, the NEC 210.12 room list, what happens when you extend a circuit and how to plan it. 3 min read Electricians Consumer Unit Replacement in the UK: What Is Involved and What a Good Quote Includes Replacing a fuse box in the UK: what a modern consumer unit includes, the testing and certificates involved, Part P notification and how a circuit plan helps. 4 min read Electricians Cooker Circuit Guide: Cable Size, Diversity and the Cooker Switch UK cooker circuits explained: how diversity turns a 12 kW cooker into a 32 A circuit, typical cable sizes, where the cooker switch goes and how to draw it. 3 min read
Browse all guides