A loft conversion adds a whole new floor, and the electrics need planning like one. New circuits, an en-suite, stair lighting and fire alarms all come together under a sloping roof. This guide covers what a loft electrical plan should include. For the layout itself, see our loft conversion floor plan guide.
Key takeaways
- Treat the loft as a new floor with its own lighting and socket circuits.
- The new stairs need lighting on two-way switching.
- Adding a floor usually means mains-powered, interlinked smoke alarms on every level.
- Keep sockets on full-height walls and check downlight positions against the rafters.
Circuits
- A lighting circuit for the new floor, or an extension of the existing upstairs circuit if it has capacity.
- A socket circuit for the new rooms. Check the floor area and load before adding to an existing ring.
- Supplies for an en-suite fan and, if needed, an electric shower or towel rail.
Stairs and switching
The new staircase needs lighting you can switch on at the bottom and the top. That means two-way switching between the floors, shown on the plan as two switches linked to the same landing light.
Fire safety
Adding a floor usually means upgrading fire detection. Building Regulations guidance generally calls for mains-powered, interlinked smoke alarms in the circulation spaces on every level, so an alarm on the new landing links to the ones below. Draw the alarms and the interlink on the plan.
Check the rules. Loft conversions need Building Regulations approval, and the electrical work is usually notifiable under Part P. Confirm the fire strategy with building control.
Under the slope
Sockets and lights have to work with the sloping ceiling. Mark the low areas on the plan and keep sockets on the full-height walls, and downlights where they clear the insulation and the rafters.
Frequently asked questions
Does a loft conversion need a new circuit?
Often, yes. Check the floor area and the load before extending an existing circuit.
Is loft conversion electrical work notifiable?
New circuits are notifiable under Part P in England, and the conversion itself needs Building Regulations approval.
Do I need smoke alarms in a loft conversion?
Building Regulations guidance generally calls for interlinked mains alarms in the circulation spaces on every level, including the new one.
Free lesson. Want the full picture? A worked example is part of our free electrical floor plans course, with interactive exercises.
Plan it on your phone. Draw the new floor, route the circuits and link the alarms, then share one plan with the builder and building control. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.