The kitchen is the most heavily regulated room in a US home when it comes to wiring. The rules decide how many circuits you need, where every countertop receptacle goes and what protection they have. Laid out on a floor plan, they are easier to follow than they sound.
Key takeaways
- A dwelling kitchen needs at least two 20 A small-appliance branch circuits for its countertop receptacles.
- No point along the countertop wall line may be more than 24 in from a receptacle, so receptacles end up no more than 4 ft apart.
- Kitchen receptacles need GFCI protection, and kitchen circuits need AFCI protection.
- Island and peninsula rules have changed in recent editions: check the one your jurisdiction uses.
Two small-appliance circuits
NEC 210.11(C)(1) and 210.52(B) require at least two 20 A, 120 V small-appliance branch circuits to serve the receptacles in the kitchen, pantry, breakfast room and dining room. They are for plug-in appliances: toasters, kettles, mixers. Lighting does not go on these circuits. On a plan, give each circuit its own colour and alternate receptacles between them where you can, so two appliances side by side are on different circuits.
Countertop receptacle spacing
Under 210.52(C), every wall countertop space 12 in or wider needs a receptacle, and no point along the wall line may be more than 24 in, measured horizontally, from one. In practice that means a receptacle within 2 ft of each end of a counter run and no more than 4 ft between receptacles. A sink or range breaks the counter into separate spaces, and each space is measured on its own.
Receptacles serving the countertop go on or above it, and not more than 20 in above the surface.
Islands and peninsulas
This rule has moved. The 2020 edition required island and peninsula receptacles based on the countertop area. The 2023 edition made them optional, but if you leave them out you must provide for adding one later, and receptacles are no longer allowed on the side of the cabinet below the countertop. Later editions have changed the wording again. Ask your inspector which edition applies before you finalise the island.
GFCI and AFCI protection
Under the 2023 NEC, all kitchen receptacles need ground-fault circuit-interrupter protection, not only those serving the countertop. Kitchens are also on the list of rooms whose 120 V, 15 A and 20 A branch circuits need arc-fault protection. A dual-function breaker provides both from the panel.
Dedicated circuits
Fixed appliances usually get their own circuits: the range or cooktop and oven, dishwasher, garbage disposal, built-in microwave and often the refrigerator. The appliance instructions and nameplate give the circuit size.
Check the rules. States and cities adopt different editions of the NEC, often with local amendments. This guide is a plain-English summary based on recent editions. Always check the edition your jurisdiction enforces and ask your inspector when in doubt.
Draw it before you rough in
- Draw the kitchen to scale with cabinets, sink, range and island.
- Place a receptacle within 2 ft of each end of every counter run, then fill in so none are more than 4 ft apart.
- Draw the two small-appliance circuits back toward the panel in different colours.
- Add the dedicated circuits and label each one.
In RoomPlot the receptacle symbols snap to the walls, each circuit route gets its own colour and the plan exports as a PDF with a legend that you can attach to a permit application or hand to the crew.
Frequently asked questions
How far apart can kitchen countertop outlets be?
No point along the countertop wall line can be more than 24 in from a receptacle, which works out to a maximum of 4 ft between receptacles.
Can the refrigerator be on a small-appliance circuit?
Yes, the NEC allows it. Many electricians give the refrigerator its own 15 A or 20 A circuit so a tripped countertop circuit does not spoil food.
Do kitchen lights go on the 20 A appliance circuits?
No. The small-appliance circuits serve receptacles. Lighting goes on a separate circuit.
Free lesson. Want the full picture? US rules for electrical plans is part of our free electrical floor plans course, with interactive exercises.
Sources
- NFPA 70, National Electrical Code: free online access and development
- NFPA: NEC adoption maps by state
- Electrical Safety Foundation International (ESFI)
Plan it on your phone. Lay out every countertop receptacle to scale and colour the two small-appliance circuits before the walls are closed. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.