Electrics that keep tripping are one of the top electrical questions people search for. A trip is your consumer unit doing its job: something on a circuit is drawing too much current or leaking current to earth. This guide explains the common causes, the safe checks anyone can do, and how a simple circuit map gets the fault found faster.
Key takeaways
- A trip means the consumer unit is doing its job.
- A circuit breaker trips on too much current. An RCD trips on current leaking to earth.
- Unplug everything on the circuit, then reconnect appliances one at a time to find the cause.
- If it trips with nothing plugged in, call an electrician.
What the trip is telling you
- A circuit breaker (MCB) trips when a circuit carries more current than it is rated for, for example too many heaters on one circuit, or a short circuit.
- An RCD or RCBO trips when current leaks to earth, often through a faulty appliance, water in an outdoor fitting or damaged cable.
Common causes
- A faulty appliance, often a kettle, washing machine, dishwasher or fridge.
- Water in outdoor lights or sockets after rain.
- Overloaded extension leads and adaptors.
- A nail or screw through a cable after DIY.
- Old wiring with worn insulation.
Safe checks you can do
- Note which way has tripped and which rooms lost power.
- Unplug everything on that circuit, then switch the way back on.
- If it holds, plug appliances back in one at a time. If one trips it, that appliance is the likely cause.
- If the way trips with everything unplugged, leave it off and call an electrician.
Stay safe. Do not open the consumer unit, sockets or light fittings to look for the fault, and never hold a breaker on. Repeated tripping with nothing plugged in needs a registered electrician.
A circuit map saves call-out time
The first thing an electrician asks is which circuits feed which rooms. A floor plan with each circuit shaded as an area answers that in seconds and points straight at the right part of the house. It also makes the labels on the consumer unit easy to write. Electricians can hand the map over at the end of the job as part of the paperwork.
Frequently asked questions
Why does my RCD trip when it rains?
Water getting into an outdoor light, socket or cable joint lets current leak to earth, and the RCD disconnects it.
Which appliances cause tripping most often?
Kettles, washing machines, dishwashers, fridges and freezers are common causes, especially as heating elements age.
Is it safe to keep resetting a breaker?
No. Reset it once after unplugging appliances. Repeated tripping means there is a fault that needs finding.
Free lesson. Want the full picture? Circuits explained is part of our free electrical floor plans course, with interactive exercises.
Plan it on your phone. Shade each circuit as an area on the floor plan and you have a fault-finding map for the whole home. Download RoomPlot on the App Store and draw your first electrical plan in minutes, or see what it does on our electricians page.